Impacts of Mixed-Wettability on Brine Drainage and Supercritical CO2 Storage Efficiency in a 2.5-D Heterogeneous Micromodel

Geological carbon storage (GCS) involves unstable drainage processes, the formation of patterns in a morphologically unstable interface between two fluids in a porous medium during drainage. The unstable drainage processes affect CO2 storage efficiency and plume distribution and can be greatly complicated by the mixed-wet nature of rock surfaces common in hydrocarbon reservoirs where supercritical CO2 (scCO2) is used in enhanced oil recovery. We performed scCO2 injection (brine drainage) experiments at 8.5 MPa and 45°C in heterogeneous micromodels, two mixed-wet with varying water- and intermediate-wet patches, and one water-wet. The flow regime changes from capillary fingering through crossover to viscous fingering in the micromodels of the same pore geometry but different wetting surfaces at displacement rates with logCa (capillary number) increasing from −8.1 to −4.4. While the mixed-wet micromodel with uniformly distributed intermediate-wet patches yields ~0.15 scCO2 saturation increase at both capillary fingering and crossover flow regimes (−8.1 ≤ logCa ≤ − 6.1), the one heterogeneous wetting to scCO2 results in ~0.09 saturation increase only at the crossover flow regime (−7.1 ≤ logCa ≤ − 6.1). The interconnected flow paths in the former are quantified and compared to the channelized scCO2 flow through intermediate-wet patches in the latter by topological analysis. At logCa > − 6.1 (near well), the effects of wettability and pore geometry are suppressed by strong viscous force. Both scCO2 saturation and distribution suggest the importance of wettability on CO2 storage efficiency and plume shape in reservoirs and capillary leakage through caprock at GCS conditions

Ofatumumab and high-dose methylprednisolone for the treatment of patients with relapsed or refractory chronic lymphocytic leukemia.

Ofatumumab is a humanized anti-CD20 monoclonal antibody that has been approved by the FDA for the treatment of patients with chronic lymphocytic leukemia. We conducted a phase II single-arm study at a single center. Patients received ofatumumab (300 mg then 1000 mg weekly for 12 weeks) and methylprednisolone (1000 mg/m(2) for 3 days of each 28-day cycle). Twenty-one patients enrolled, including 29% with unfavorable cytogenetics (del17p or del11q). Ninety percent of patients received the full course without dose reductions or delays. The overall response rate was 81% (17/21) with 5% complete response, 10% nodular partial response, 67% partial response, 14% stable disease and 5% progressive disease. After a median follow-up of 31 months, the median progression-free survival was 9.9 months and the median time to next treatment was 12.1 months. The median overall survival has not yet been reached. The combination of high-dose methylprednisolone and ofatumumab is an effective and tolerable treatment regimen. This regimen may be useful for patients who are unable to tolerate more aggressive therapies, or have not responded to other treatments

Vertex-Ball Spring Smoothing: An efficient method for unstructured dynamic hybrid meshes

postprin

The Roles of Substrate vs Nonlocal Optical Nonlinearities in the Excitation of Surface Plasmons in Graphene

It has recently been demonstrated that difference frequency mixing (DFM) can generate surface plasmons in graphene [1]. Here, we present detailed calculations comparing the contributions to this effect from substrate and from graphene nonlinearities. Our calculations show that the substrate (quartz) nonlinearity gives rise to a surface plasmon intensity that is around twelve orders of magnitude smaller than that arising from the intrinsic graphene response. This surprisingly efficient intrinsic process, given the centrosymmetric structure of graphene, arises almost entirely due to non-local contributions to the second order optical nonlinearity of graphene

Scaling the impacts of pore-scale characteristics on unstable supercritical CO2-water drainage using a complete capillary number

Geological carbon storage in deep aquifers involves displacement of resident brine by supercritical CO2 (scCO2), which is an unstable drainage process caused by the invasion of less viscous scCO2. The unstable drainage is greatly complicated by aquifer heterogeneity and anisotropy and regarded as one of the key factors accounting for the uncertainty in storage capacity estimates. The impacts of pore-scale characteristics on the unstable drainage remain poorly understood. In this study, scCO2 drainage experiments were conducted at 40 °C and 9 MPa using a homogeneous elliptical micromodel with low or high anisotropy, a homogeneous/isotropic hexagonal micromodel, and a heterogeneous sandstone-analog micromodel. Each initially water-saturated micromodel was invaded by scCO2 at different rates with logCa (the capillary number)ranging from −7.6 to −4.4, and scCO2/water images were obtained. The measured CO2 saturations in these centimeter-scale micromodels vary considerably from 0.08 to 0.93 depending on the pore-scale characteristics and capillary number. It was also observed that scCO2 drainage follows the classic flow-regime transition from capillary fingering through crossover to viscous fingering for either of the low-anisotropy elliptical and heterogeneous micromodels, but with disparate crossover zones. The crossover zones of scCO2 saturation were then unified with the minimum scCO2 saturation occurring at logCa*=-4.0 using the complete capillary number (Ca*)that considers pore characteristics. For the hexagonal and the high-anisotropy elliptical micromodels, a monotonic increase in scCO2 saturation with increasing Ca* (without crossover)was observed. It appears that the complete capillary number is more appropriate than the classic capillary number when characterizing flow regimes and CO2 saturation in different pore networks

Coupled supercritical CO2 dissolution and water flow in pore-scale micromodels

Dissolution trapping is one of the most important mechanisms for geological carbon storage (GCS). Recent laboratory and field experiments have shown non-equilibrium dissolution of supercritical CO2 (scCO2) and coupled scCO2 dissolution and water flow, i.e., scCO2 dissolution at local pores/pore throats creating new water-flow paths, which in turn enhance dissolution by increased advection and interfacial area. However, the impacts of pore-scale characteristics on these coupled processes have not been investigated. In this study, imbibition and dissolution experiments were conducted under 40 °C and 9 MPa using a homogeneous/isotropic hexagonal micromodel, two homogeneous elliptical micromodels with low or high anisotropy, and a heterogeneous sandstone-analog micromodel. The four micromodels, initially saturated with deionized (DI)-water, were drained by injecting scCO2 to establish a stable scCO2 saturation. DI water was then injected at different rates with logCa (the capillary number) ranging from −6.56 to −4.34. Results show that bypass of scCO2 by displacing water is the dominant mechanism contributing to the residual CO2 trapping, triggered by heterogeneity in pore characteristics or pore-scale scCO2-water distribution. Bypass can be enhanced by pore heterogeneity or reduced by increasing transverse permeability, resulting in relatively low (<2% of CO2 solubility) or high (9–13% of CO2 solubility) dissolved CO2 concentration in displacing water. The overall dissolution of residual scCO2 increases with decreasing Ca, and approaches to their solubility at low Ca value with sufficient residence time. This main trend is similar to a capillary desaturation curve that represents the relationship between the residual saturation and Ca. Spatially, dissolution initiates along the boundary of bypassed scCO2 cluster(s) in a non-equilibrium manner, and the coupling of water flow and dissolution occurs which fragments the bypassed scCO2 clusters and enhance scCO2 dissolution

Flood impact assessment under climate change scenarios in central Taipei area, Taiwan

Providing effective information regarding flood control for responding climate change is essential to future flood risk management for cities. This study simulated and assessed the impacts of flooding for future climate change scenarios in Taipei city, Taiwan. We modelled rainfall events, generated by general circulation models, with different return periods. The flood extents and damage in the Central Taipei Area for the A1B climate change scenarios were compared to the ones, caused by the rainfall events with same return periods, without climate change (baseline scenario). The proposed approach provides potential flooding maps and flood damage assessment for climate change scenarios as useful information for flood risk management in urban areas.The work is supported by the National Science Council, Taiwan (NSC 99-2915-I-002-120) and the CORFU project, funded by the European Commission through Framework Programme 7, Grant Number 244047

Impaired flush response to niacin skin patch among schizophrenia patients and their nonpsychotic relatives: The effect of genetic loading

We previously reported familial aggregation in flush response to niacin skin patch among schizophrenia patients and their nonpsychotic relatives. However, little is known about whether this abnormal skin response is associated with genetic loading for schizophrenia. This study compared the niacin flush response in subjects from families with only one member affected with schizophrenia (simplex families) with those from families having a sib-pair with schizophrenia (multiplex families). Subjects were patients with schizophrenia and their nonpsychotic first-degree relatives from simplex families (176 probands, 260 parents, and 80 siblings) and multiplex families (311 probands, 180 parents, and 52 siblings) as well as 94 healthy controls. Niacin patches of 3 concentrations (0.001M, 0.01M, and 0.1M) were applied to forearm skin, and the flush response was rated at 5, 10, and 15 minutes, respectively, with a 4-point scale. More attenuated flush response to topical niacin was shown in schizophrenia probands and their relatives from multiplex families than in their counterparts from simplex families, and the differentiation was better revealed using 0.1M concentration of niacin than 0.01M or 0.001M. For the highest concentration of 0.1M and the longest time lag of 15 minutes, a subgroup of probands (23%), parents (27%), and siblings (19%) still exhibited nonflush response. Flush response to niacin skin patch is more impaired in schizophrenia patients and their relatives from families with higher genetic loading for schizophrenia, and this finding has implications for future genetic dissection of schizophrenia. © 2008 The Authors.published_or_final_versio

SPH study of the evolution of water–water interfaces in dam break flows

The mixing process of upstream and downstream waters in the dam break flow could generate significant ecological impact on the downstream reaches and influence the environmental damages caused by the dam break flood. This is not easily investigated with the analytical and numerical models based on the grid method due to the large deformation of free surface and the water-water interface. In this paper, a weakly compressible Smoothed Particle Hydrodynamics (WCSPH) solver is used to study the advection and mixing process of the water bodies in two-dimensional dam-break flows over a wet bed. The numerical results of the mixing dynamics immediately after the release of the dam water are found to agree satisfactorily with the published experimental and numerical results. Then further investigations are carried out to study the interface development at the later stage of dambreak flows in a long channel. The analyses concentrate on the evolution of the interface at different ratios between the upstream and downstream water depths. The potential capabilities of the mesh-free SPH modelling approach for predicting the detailed development of the water-water interfaces are fully demonstrated.The first author acknowledges the Jafar Studentship during her PhD study at the University of Cambridge. The other authors acknowledge the support of the Major State Basic Research Development Program (973) of China (No. 2013CB036402), Open Fund of the State Key Laboratory of Hydraulics and Mountain River Engineering, Sichuan University (SKHL1404; SKHL1409), Start-up Grant for the Young Teachers of Sichuan University (2014SCU11056) and National Science and Technology Support Plan (2012BAB0513B0).This is the accepted manuscript. The final version is available at http://link.springer.com/article/10.1007%2Fs11069-015-1726-6

Electromagnetically Induced Transparency and Slow Light with Optomechanics

Controlling the interaction between localized optical and mechanical excitations has recently become possible following advances in micro- and nano-fabrication techniques. To date, most experimental studies of optomechanics have focused on measurement and control of the mechanical subsystem through its interaction with optics, and have led to the experimental demonstration of dynamical back-action cooling and optical rigidity of the mechanical system. Conversely, the optical response of these systems is also modified in the presence of mechanical interactions, leading to strong nonlinear effects such as Electromagnetically Induced Transparency (EIT) and parametric normal-mode splitting. In atomic systems, seminal experiments and proposals to slow and stop the propagation of light, and their applicability to modern optical networks, and future quantum networks, have thrust EIT to the forefront of experimental study during the last two decades. In a similar fashion, here we use the optomechanical nonlinearity to control the velocity of light via engineered photon-phonon interactions. Our results demonstrate EIT and tunable optical delays in a nanoscale optomechanical crystal device, fabricated by simply etching holes into a thin film of silicon (Si). At low temperature (8.7 K), we show an optically-tunable delay of 50 ns with near-unity optical transparency, and superluminal light with a 1.4 microseconds signal advance. These results, while indicating significant progress towards an integrated quantum optomechanical memory, are also relevant to classical signal processing applications. Measurements at room temperature and in the analogous regime of Electromagnetically Induced Absorption (EIA) show the utility of these chip-scale optomechanical systems for optical buffering, amplification, and filtering of microwave-over-optical signals.Comment: 15 pages, 9 figure